All Products
Aquamist 0–5 V Flow Sensor
$359.00
Description Turn a basic WMI setup into an Aquamist-calibre systemKeep your setup. Replace the guesswork. For over three decades, Aquamist has defined the standard in water/methanol injection....
View full product details
Aquamist HFS4
$2,199.00
Aquamist HFS4 System Aquamist has been pioneering the IDC based water injection system since 2003 with great success. The system retrieves the fuel flow (IDC) and...
View full product details
Aquamist HFS3
$1,999.00
Aquamist HFS3 System Aquamist has been pioneering the IDC based water injection system since 2003 with great success. The system retrieves the fuel flow (IDC)...
View full product details
Jet Adapter
$23.00
Nickel plate brass adaptor for thin wall charge pipes. Simply tap and Loctite in position. A M8 blanking plug is included. External thread is 1/8...
View full product details
8 Way Hex Manifold
$138.00
Nickel plated brass manifold for multi-port injection. For vacuum application, checkvalve jets is recommend to minimise cross jet siphoning. Please note, plating finishes may vary...
View full product details
6 Way Hex Manifold
$119.00
Nickel plated brass manifold for multi-port injection. For vacuum application, checkvalve jets is recommend to minimise cross jet siphoning. Please note, plating finishes may vary...
View full product details
4 Way Hex Manifold
$88.00
Nickel plated brass manifold for multi-port injection. For vacuum application, checkvalve jets is recommend to minimise cross jet siphoning. Please note, plating finishes may vary...
View full product details
Large Pump (3000cc)
$650.00
Replacement water 160psi pump for the HFS2/3/4 system. (without fittings and fixing hardware). The pump pressure can be adjusted to in excess of 280psi...
View full product details
Standard Pump (1600cc)
$500.00
Replacement water 160psi pump for the HFS2/3/4 system. (without fittings and fixing hardware). The pump pressure can be adjusted to in excess of 280psi...
View full product details
Vent System
$35.00
We are offering a remote tank venting kit for those who runs high concentration of methanol. A 10mm hole must be drilled on the cap...
View full product details
Aquamist 8-Cylinder Direct-Port Bundle
$899.00
Aquamist direct-port bundle for eight-cylinder water/methanol injection installations. Use it as part of a new system or to convert an existing installation to direct-port injection....
View full product details
Aquamist 6-Cylinder Direct-Port Bundle
$699.00
Aquamist direct-port bundle for six-cylinder water/methanol injection installations. Use it as part of a new system or to convert an existing installation to direct-port injection....
View full product details
Aquamist 4-Cylinder Direct-Port Bundle
$599.00
Aquamist direct-port bundle for four-cylinder water/methanol injection installations. Use it as part of a new system or to convert an existing installation to direct-port injection....
View full product details
6mm to 1/8 BSP Compression Fitting
$15.13
6mm to 1/8 BSP Compression Fitting. Can also be use on other water injection system to replace push lock fittings, which are prone to leak...
View full product details
10 L Tank
$399.00
A single 10L tank (2.64 US gallons) (internally baffled) is now available, for those requiring greater storage capacity. Only 143mm (5.6") wide. 335 (13") deep...
View full product details
5 L Tank
$299.00
Only 66mm (2.6") wide. 335 (13") deep and 335 (13") tall. Capacity: 5 litres (5-quarts). Tank adaptor and level sensor are not included (for illustration...
View full product details
Atomising Jet (0.4mm-1.2mm)
$44.50
Nickel plated brass water/methanol jet for 4mm(od) x 2.5mm(id) nylon hose
View full product details
Check Valve
$40.90
Inline check valve 15psi "crack pressure", 4mm or 6mm hose tail.
View full product details
Dash Guage
$289.00
Replacement gauge for HFS3 and HFS4. Available in with blue or red display.
View full product details
Check Valved Atomising Jet (0.4mm-1.2mm)
$98.00
Nickel plated brass water/methanol jet for 4(od)x2.5(id) mm nylon hose. We also offer compression type fitting at no extra charge. 5mm and 10mm extended jets...
View full product details
Low Profile Compression Right Angle Jet Adaptor
$31.40
Low Profile Compression Right Angle Jet Adaptor.
View full product details
Water Level Sensor
$65.56
Replacement water level sensor for the HFS2/3/4 system. (with 2w amp connector)
View full product details
6mm Water Pump Inlet/Outlet Adaptor
$35.50
Nickel plated brass 3/8 BSPM to 6mm(od) nylon hose water pump inlet/outlet adaptor. Compression type fitting with o-ring seal.
View full product details
10L Tank Bundle for stand alone Water Injection Systems
$599.00
10L Tank Bundle for stand alone Water Injection Systems. Includes 10L tank, tank bracket, level sensor, filter, suction pickup and 6mm compression fitting.
View full product details
4mm & 6mm 15psi Checkvalve
$39.50
Inline check valve 15psi "crack pressure", 4mm or 6mm hosetail
View full product details
Hi-pressure inline 130um filter
$65.50
Withstands pressure in excess of 300psi. Intended for use post pump. Internal 130um cone profile ensures maximum filter area. 1/8BSPF inlet, 1/8BSPM outlet.
View full product details
Replacement FAV only for HFS3/4
$240.00
Replacement fast acting vakve foir HFS3/4. Without electrical plug, SS bracket, fittings and fasterners. Warning: never run hydrocarbon contaminated fluid through this valve. The internal...
View full product details
Replacement Flow Sensor Assembly
$220.85
Replacement turbine flow sensor assembly
View full product details
Replacement Hall-effect Flow sensor cable
$89.50
Hall effect sensor clip for the aquamist HFS-xx system. (yellow harness) length:2.5M
View full product details
Replacement HFS2/3/4 Red harness
$39.90
Replacement Red FAV Harness for the HFS3/4 systems
View full product details
Replacement HFS2/3/4 pump harness
$219.91
Replacement pump harnnes for HFS3 and 4. Approximately 6 meter.
View full product details
